Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

Battery Chargers

Replace your 3 phase charger with our single phase battery charger:


The new 1000w 48 v,  24v and 12v Tortech battery chargers will charge large forklift batteries from a single phase source. (240v 10Amp GPO outlet) .  

With this battery charger you don't need a three phase outlet anymore to charge your forklift traction battery!

 

1) This is a great  advantage when you do not have a three phase outlet. It also is very convenient as the charger is small and light and will connect to any normal 10Amp 240v outlet.

 

2) These chargers are a 8 stage charger with battery  pulse supply and equalisation (desulphation) options.

WHAT DOES THIS MEAN?   These chargers can help refurbish your tired battery.


A typical example is as follows:

The 48v 1000w charger will charge a  48v DC 630Amp hour  forklift battery and bring it back to a very good SOC (state of charge) over a charge period of approximately 10 hours.

A good SOC means the battery voltage after more than 3 hours after completion of the charging period, will have a DC voltage of more than 50.8v Dc. This represents a 100% SOC.

 

3) Now, we recommend the use of a 240v 10A timer, so you can use the off peak rate of electricity do reduce the cost of electricity during the charge period. This is straight forward.

You just plug in the 240v lead of the charger into the 240v timer, which inturn plugs into the 10A 240v GPO outlet.

 
 Main Features :
 
  •   Up to 8 stage charging -reconditioning battery charger 
  •   AC Input 115/230VAC selected by switch / Full range AC input for larger unit
  •   Built-in passive PFC function compliance to EN61000-3-2 Class A / Active PFC function PF>0.95 for larger unit
  •   Protection: Short circuit / Reverse polarity / Over voltage / Over temperature
  •   Charger for lead-acid batteries
  •   2-Bank charger for 1000watt unit
  •   2 or 3 color LED loading indicator
  •   Low cost, High reliability
  •   FAN on/off control (Depends on charging current)
  •   3 years warranty
Video Single Phase battery charger to

regenerate large forklift battery

The PB battery charger is unique and adapts the latest micro-controller power management technology to efficiently charge and revive lead-acid batteries. These battery chargers (600W and 1000W) use an 8-stage charging cycle which incorporates pulse, soft start, constant current, constant voltage, analysis, recondition, float and maintain states.

This advanced technology when used in conjunction with protection features such as misconnection (wrong voltage), reverse polarity, battery disconnection and battery failure analysis makes this charger a very popular product. This charger comes in a range of power and voltage configuration depending on the size and the voltage rating of the battery.

This charger is highly recommended for stand-alone systems which use a battery buffer to constantly charge and discharge. It is important to note that whilst the charger has an intelligent 8-stage charging technology, it still remains light and portable. There are 3 curves used in charging depending on the time available to charge. (Note: only 600W and 1000W battery chargers have 3 different types of charging curves, 300W and 360W only have 1 charging curve which is 3 stage charging.)  

 

1)      2 stage charging – this can be used to charge batteries where the time is a constraint. This is quick and convenient.

2)      3 stage charging – this can be used to charge batteries and maintain the charge (quick + float).

3)      8-stage charging – this can be used to optimise charging. This is highly recommended as it ensures battery longevity. 8-stage battery charging will ensure that each cell has identical voltage. This cycle incorporates equalisation of battery cells which enables the prevention of a short-battery life.

Battery charging from the mains can also be optimised using a timer to charge during off-peak, resulting in savings over a period of time.


8-stage battery charging:

It can be noted that multi-stage charging is common amongst several battery chargers available in the industry today. However, an 8 stage charging with frequent battery analysis to ensure optimisation and longevity of the battery is provided only by this charger. Some of the advantages are outlined below.

1)      Pulse-stage: This stage is used to resuscitate aged batteries.

2)      Recondition stage: Permits full charge of battery.

3)      Float and maintain stage: This ensures that the user will always have a fully charged battery to depend on.

NOTE:

This charge is highly recommended for use with our inverters in a stand-alone system if user wants to simultaneously charge and discharge from batteries.

This charger has the capability to fully charge  your battery to its optimum charged state and increases the life of the battery.

 
 

 

Image: Charging forklift
Model
Output (DC)
Size (mm)
Weight (Kg)
PB-300P-12
14.4V - 20.8A
253 x 135 x 48.5
1.45
PB-300P-24
28.8V - 10.5A
253 x 135 x 48.5
1.45
PB-300P-48 57.6V - 5.3A 253 x 135 x 48.5 1.45
PB-360P-12 14.4V - 24.3A 253 x 135 x 48.5 1.5
PB-360P-24 28.8V - 12.5A 253 x 135 x 48.5 1.5 
PB-360P-48 57.6V - 6.25A  253 x 135 x 48.5 1.5 
PB-600-12 14.4V - 40A 230 x 158 x 67 2.2
PB-600-24 28.8V - 21A 230 x 158 x 67 2.2
PB-600-48  57.6V - 10.5A 230 x 158 x 67 2.2 
PB-1000-12  14.4V - 60A 300 x 184 x 70 3.5
PB-1000-24  28.8V - 34.7A  300 x 184 x 70  3.5 
PB-1000-48 57.6V - 17.4A 300 x 184 x 70 3.5 
 Please select which Output Voltage you require when you Order (12V , 24V or 48V).

4 Item(s)

List  Grid 

Set Descending Direction
  1. 300W intelligent Single Output Battery Charger

    300W intelligent Single Output Battery Charger      Part No. TT-300P

    Battery Charger 300Watts,  For 12 / 24 / 48V  Battery Systems

    Read More
    $233.00

  2. 360W intelligent Single Output Battery Charger

    360W intelligent Single Output Battery Charger      Part No. TT-360P

    Battery Charger 360Watts,  For 12 / 24 / 48V  Battery Systems

    Read More
    $274.00

    Out of stock


  3. 600w intelligent Single Output Battery Charger

    600w intelligent Single Output Battery Charger      Part No. TT-600

    Battery Charger 600Watts,  For 12 / 24 / 48V  Battery Systems

    Read More
    $533.00

    Out of stock


  4. 1000W intelligent Single Output Battery Charger

    1000W intelligent Single Output Battery Charger      Part No. TT-1000

    Battery Charger 1000Watts,  For 12 / 24 / 48V  Battery Systems.

    Read More
    $888.00

4 Item(s)

List  Grid 

Set Descending Direction