This Transformer will allow your  Aussie device to run on American Power.  It changes  120 volts up to 240 volts.    This Step Down is for appliances  100 watts or less Protect your US appliance - buy a step down that is guaranteed safe: Highest Quality - All of our Stepdowns come with a 1 Year Money Back Warranty!   ü We include safetly fuse protection  Unlike others - Our Stepdowns are desgined for continuous rating - read why important ü Thermal overload in the winding of the transformer ü Strong Carry handle ü Comply with Australian standards - made to AS/NZS65118 ü Enclosed and strong metal construction with rubber feet and powder finish ü All enclosures are earthed to chassis ü 100% electrical & flash tested All Units come with Support  and 1 Year Warranty   Your buying direct here from the transformer  manufacturer in Sydney.   Unit Details: Suitable for USA devices from 110-120v Converts Voltage down from 240 volt to 110 volt US   Fully enclosed unit with a white powder coated finish  Fuse protected on the 240 volt side  100VA Rating No Isolation input to output. Earth from the input is carried thought the output Fuse is in the active leg. Part Number sU110-100A As Featured on toolreviews.com - read  the Independent review of our Stepdowns   If you are unsure about what  stepdown you will need please check these questions:

High quality - all our stepdowns  come   with a    1 year warranty   Pictures of the  Stepdown Transformer:         The 240v side Safety fuse

1. What  is the total watts used by  appliances to be connected to the Transformer?

Select from our Stepdowns range below  based on how many watts your device uses*.

E.g:  Playstation 3 uses 380 Watts so you need 500 watt stepdown transformer.

2. Does  your appliance have a motor ?

If a  motor is included then you should select a stepdown rating at least 25%  higher than your motor as a buffer. Motors  have higher power use on the stepdowns and startup currents which need to be  allowed for. Most motors have a rating plate on them with their Power and  Amperage rating.

3. Does  your appliance have a mechanical  timing device? If  so, how critical is this timing device?

If a timing device  is included the speed of the device may change due to the frequency change,  60Hz to 50Hz (eg old clocks, motors / fans)
4. Do  you know the Amps of your device?  - is so you can calculate the watts required:

Calculated as Watts = Amps x 110 Volts (eg 5 A x 110 V  = 500 watts)
5. Do  you wish to use multiple  appliances from one stepdown?

Check total watts of all devices this must be  less than the VA rating of the stepdown & get a US Powerboard 

You may also  contact  us with your reply to above questions & we will advise the unit that is  required.    

Wattage people need to check the Input  Power Rating label on their Product  for  the Watt (W) and Amp (A) figures.

Always look at the INPUT  POWER rating

USA Equipment is identified as 110v,  115v , 120v

Japan 100V European 220v

Shipping

Quick Delivery 2-3 Days Australia wide by Eparcel You will receive a tracking Number by email

Please note that   this unit is not designed for Japanese Devices.

Please checkout   our page_www.StepDownTransformer.com.au  for Japanese   Stepdowns.

Enquries?

ü  We   accept pick up from our office

ü  Enquiries 0297425812

Warranty &  returns :

All Units come with a  1 year warranty due to their very high quality

In the rare event of a  malfunction due to manufacturing we will refund or exchange ,if malfunction  due to misuse such as overloading / blowing fuse, extra cost may be incurred (please  always check fuse & if needed replace the fuse before returning unit) Exchanges,  refunds and replacements have a 20% restocking fee with shipping fees non  refundable.