Tortech

Industrial Step Up / Down Transformers &  Auto Voltage Converter           SEE  OUR  NEW  200V RANGE   BELOW  !!  For Single Phase and Three Phase 415V  Industrial Machine  Conversions. (see here for European 380v) A Transformer is the ideal solution if you want to run an Overseas device NOT designed for the Australian 240 / 415 Volts. The transformer will convert 415V into 200 Volts to allow your USA Overseas Equipment to work here in AUSTRALIA. For Example, most 3 Phase USA machines are 200-208V, which cannot run on 415V. Also, Most European 3 Phase Equipment is 380V, which also need to be converted. A 3 Phase step Down Transformer  will convert the 415V down to the required Voltage  We build these converters to Order,  for all Countries and Voltages.  Please Enquire Direct.  These items are mainly for Industrial & Factory environment with High Capacity, Not for Domestic Use. They must be Hard Wired into the Electrical supply by a Licenced  Electrician  or  Electrical  Contractor.	Strong Vented Metal Casing
Our Transformers are of the Highest Quality All our Units come with a 1 Year Money Back Warranty!  Our unit is Fully Australian Made.  Isolated input to output versions Possible.  We can include Safety Fuse or Circuit Breaker Protection  Enclosed strong metal construction. Strong Carry handle available. To Help determine which Transformer you will need, please check these questions first:  1. What is the total watts or VA used by the appliances to be connected to the Transformer? Select from our range below, based on how many watts your device uses Choose the unit with matching power rating or the next one up. Most appliances have a rating label on them. E.g: If your device uses 2800 VA you will need a 3000 VA transformer. (3.0kVA) 2. If a timing device or motor is included the Speed of the device may change if the Frequency changes, eg. 50Hz to 60Hz. The Transformer cannot change Frequency. In most cases this will not be a problem. This may occur with Fans and Motors.  3. Do you know the Amps of your 3 Phase device? - if so you can calculate the watts (VA) required: Calculated as Watts (VA)= Amps x Volts x 1.732 (eg 4 Amps x 200V x 1.732 = 1385 watts (or1.4kVA))  For some Loads (non resistive) you will also need to take into account Power Factor (PF), or allow at least 25% Headroom. [ VA * PF = Watts ] Most loads will be Inductive (motors and compressors) and have low pf around 0.8 or less)  Available in 200 or 220V phase to phase 50hz Not sure which Unit you will need? Then  please contact us with your answers to above questions & we will advise the you the unit required.	Sturdy Carry Handles optional 3 Phase Stepdown Enclosures
To Order call us on             (02) 9642 6003       or send us an Email Enquiry  Quoting the Part Number and Version (Open or Enclosed)

3 three Phase step down transformer Australia (0)